Harga: Rp 14.655.000
Soundcraft MH2 40-Channel Live Mixing Console (second eks studio rekaman Buatan england) Tlp : 085772204886 .....COD dan cek Kondisi silahkan.
Note : Barang tidak ada Hardcase.....Klo dus ada lengkap dengan buku.....!!!!!!!!
Soundcraft MH2 40 Channel Mixing Console
Performance meets affordability!
As contractors and venues demand maximum return on investment, dual-purpose FOH and Monitors flexibility is now essential in a live sound console. MH2, the third desk in Soundcraft’s acclaimed MH Series, delivers all the critical mixing features of its siblings in a fixed frame format, achieving a performance/price ratio unheard of in any other console in its class.
Group or Aux on fader operation is selected at the touch of a button for familiar and uncomplicated operation. Soundcraft sound quality is guaranteed with the same mic preamp design used in the MH4 and MH3, classic British EQ and meticulous circuit design. And with important new features like separate line inputs on every channel, the argument for mixing with MH2 is compelling.
Four frame sizes are available, all with an integrated switched mode PSU which can be removed for easy maintenance. Naturally, a rear panel connector is provided to fit an external power supply for complete dual redundancy assurance.
Soundcraft RW5716SM MH2-40 Channel Mixing Console Features:
40 Mono, 4 Stereo Input Channels
The MH2 is available in a variety of frame configurations. This model features 40 mono and 4 stereo inputs.
8 Subgroup Outputs
The MH2 series features 8 group outputs for routing to external recorders, monitors, etc.
The matrix output mixer provides added routing flexibility.
8 Auxiliary Sends
8 auxiliary sends provide plenty of routing to external effects, monitors, etc.
All mono inputs provide direct outputs for direct routing to recorders, mixers, etc.
High Performance Microphone Preamplifiers
The MH2 microphone preamplifier's provide an ultra low-noise floor while maintaining high output gain.
Frame sizes: 24 4, 32 4, 40 4 and 48 4
Styling based closely on MH3/4, with a single-piece front panel
MH3/4 mic amp design with 50dB range plus -20dB level shift and separate 1/4" Line input
Swept high-pass filter and 4-band EQ (all bands swept)
10 Auxes, of which 2 can be switched to create 1 x stereo send
Pre/post fader switching in pairs (except 5-8 as one block of 4)
8 full-time Group busses with paired routing
LCR panning on inputs-mix
8 VCAs and 6 Mute Groups
4 Stereo Input channels with mic/line capability
4 stereo line returns with 3-band fixed EQ, returns can route to output channels
11x4 Matrix built-in
10 x linear 60mm output faders, plus 8 rotary output faders with SWAP facility to allow linear faders to control either all 10 Auxes or 8 Grps and 2 Auxes
Inserts on Groups and Mix outputs (Group insert moves between Grp & Aux)
12-segment Input and Output metering
Central assignment of VCA Groups, with individual LED displays per channel
Soundcraft RW5716SM MH2-40 Channel Mixing Console Specifications:
XLR Input to any Output 0/-1dB, 20Hz – 20kHz
T.H.D. and Noise (All measurements at 0dBu):
XLR In to Mix Out <0.03% @ 1kHz and <0.03% @ 10kHz
Mic Input E.I.N:
22Hz-22kHz bandwidth, unweighted <-128dBu (150Ω source)
Mix Output; no inputs routed, Mix fader @ 0dB -90dBu
Mix Output; 48 channels routed,
input faders @ -∞, Mix fader 0dB <-83dBu
Grp Output; 48 channels routed,
input faders @ -∞, Grp fader 0dB <-82dBu
Aux Output; 48 channels routed,
input sends @ -∞, Aux fader 0dB <-84dBu
Crosstalk 1kHz, 20dBu input signals:
Input Channel muting >95dB
Input fader cutoff >90dB
Input pan pot isolation >75dB
Mix routing isolation >90dB
Group routing isolation >90dB
Aux send off >80dB
Mono input >84dB @ 1kHz
Input & Output Levels:
Mic Input 26dBu max.
Balanced Inputs 21dBu max.
Balanced Outputs 21dBu max.
Nominal Operating Level 0dBu
Input & Output Impedances:
Mic Input >2kΩ
All other Inputs >10kΩ
Headphone Output 25Ω
Recommended Headphone Impedance 50-600Ω
All other Outputs <75Ω
63Hz to 10kHz, variable level
HP Filter (Mono Input):
EQ (Mono Input):
HF 1.2kHz - 20kHz, ±15dB, shelving
Hi-Mid 750Hz - 13kHz, ±15dB, Q=1.5
Lo-Mid 75Hz - 1.3kHz, ±15dB, Q=1.5
LF 0Hz - 500Hz, ±15dB, shelving
12-segment LED bargraphs for all inputs.
12-segment LED bargraphs for 8 Fader-controlled Outputs, plus LR & C.
Aux 9/10 metered via the LR meters.
Mains Power: 48 Ch: 300W max
Temperature Range -10ºC to 30ºC
Relative Humidity 0% to 80%